Best 3D Printer Slicers (2026): Orca, Bambu Studio, PrusaSlicer, Cura and More Compared

3D Printing Software
Tiles with the official logos of ten 3D printer slicers: Orca Slicer, Bambu Studio, PrusaSlicer, Cura, SuperSlicer, Creality Print, ElegooSlicer, QIDI Studio, Snapmaker Orca and Anycubic Slicer Next.

Best 3D Printer Slicers Compared

Orca Slicer, Bambu Studio, PrusaSlicer, Cura, SuperSlicer and five printer-maker slicers: who made them, what they are built on, and which printers they suit

A slicer turns your 3D model into the instructions your printer follows, and the one you pick shapes every print. There are now ten well-known free slicers for filament printers, and they are more closely related than they look: most grew from the same open-source ancestor, and several of the newest are printer-maker versions of Orca Slicer. This guide compares them on facts you can check: who develops each one, what it is based on, its licence, which systems it runs on, which printers it targets and what its makers highlight. It does not pretend there is one winner. The best slicer is the one that has a good profile for your printer and settings you are comfortable with, so the guide ends with a way to choose.

Family tree of the ten
Licences stated
Printers named
Checked October 2026

Article reviewed: October 2026  |  Facts taken from each project’s own pages, repository and release notes

Quick Picks: Which Slicer Should You Try First?

If you…Try firstWhy
own a Bambu Lab printerBambu StudioMade by Bambu Lab. Its page highlights AMS colour mapping, remote control and monitoring over the internet or your network, and 3MF projects with several plates.
own a Prusa printerPrusaSlicerMade by Prusa Research, with tested profiles for Prusa printers and filaments, and three modes (Simple, Advanced, Expert) that grow with you.
use printers from several brands, or a self-built machineOrca SlicerA community project with presets for Bambu Lab, Prusa, Creality, Voron and hundreds of other printers, calibration tools built in, and network sending to Klipper, PrusaLink and OctoPrint.
want a long-established slicer with a plug-in marketplaceCuraUltiMaker’s slicer: a custom mode with 400+ settings, ready-made profiles and a marketplace for materials and plug-ins; it works with other brands too.
own a Creality, Elegoo, QIDI, Snapmaker or Anycubic printerThat maker’s own slicerThe profiles come from the maker, and features tied to its printers appear there first. Compare with Orca Slicer if it has a profile for your model.
like to tinker and want extra calibration tests and brim, seam and thin-wall optionsSuperSlicerA one-developer PrusaSlicer fork built around those options. Read its card first: its release situation is unusual.

These are suggestions based on the facts below, not a ranking, and they are editorial judgement. Slicers are separate programs, so nothing stops you installing two and slicing the same model in both.

Side-by-Side Comparison

Facts as stated by each project’s own pages, repository and release notes (checked 18 October 2026). The table compares the programs, not version numbers, because those change every few weeks; the newest release is always on the vendor’s download page.

SlicerMade byBuilt onLicenceRuns onPrinters it targets
Orca SlicerCommunity (SoftFever and contributors)Bambu Studio and PrusaSlicerAGPL-3.0Windows, macOS, LinuxMany brands: Bambu Lab, Prusa, Creality, Voron and more
Bambu StudioBambu LabPrusaSlicerAGPL-3.0Windows, macOS, Linux (AppImage on GitHub, or Flathub)Bambu Lab first; profiles for other makers are bundled and you can add a custom printer
PrusaSlicerPrusa ResearchSlic3rAGPL-3.0Windows, macOS, Linux (Flathub)Prusa printers, plus profiles for third-party vendors; also mSLA resin printers
CuraUltiMakerIts own project (Uranium framework)LGPL-3.0 (the separate CuraEngine is AGPL-3.0)Windows, macOS, LinuxUltiMaker printers and many other brands
SuperSlicerOne developer (supermerill)PrusaSlicerAGPL-3.0Windows, macOS, Linux (the README says the author does not test the Linux and macOS builds)Printers on the RepRap toolchain (Marlin, Klipper and others); also mSLA resin printers
Creality PrintCrealityOrca SlicerAGPL-3.0Windows, macOS, Linux (Linux files are on GitHub)Creality printers; support for other brands is not stated
ElegooSlicerELEGOOOrca SlicerAGPL-3.0Windows, macOS; a Linux AppImage on GitHub in early supportDescribed as compatible with most FDM printers; built-in Elegoo profiles
QIDI StudioQIDI TechnologyBambu StudioAGPL-3.0Windows, macOS, Linux (AppImage on GitHub)QIDI printers (Q, X-3, X-4 and X-5 series profiles)
Snapmaker OrcaSnapmakerOrca SlicerAGPL-3.0Windows, macOS, Linux (files on GitHub)Snapmaker printers, optimised for the U1; third-party printers also supported
Anycubic Slicer NextAnycubicOrca Slicer (per Anycubic’s update log)Not found; Anycubic’s wiki calls it open sourceWindows, macOS, Linux (Ubuntu 24.04 only)Anycubic Kobra printers

Cost. All ten are free to download, and none of the pages I read shows a price for the slicer itself. Cura also has a separate Cura Enterprise edition for organisations, whose price I did not find.

The Slicers One by One

Orca Slicer open source many brands

Orca Slicer describes itself as a free, open-source slicer for FDM printers, developed in the open by its creator SoftFever and hundreds of contributors. Its website says it is free on every platform, with no account and no telemetry.

  • Licence and lineage: AGPL-3.0. The README says it draws on Bambu Studio and PrusaSlicer, with ideas from Cura and SuperSlicer.
  • What it highlights: advanced calibration tools (temperature towers, flow rate, retraction), precise wall and seam control including scarf seams, overhang and support optimisation, sending to Klipper, PrusaLink and OctoPrint printers, belt-printer support and parallel printing on IDEX machines.
  • Printers: presets for Bambu Lab, Prusa, Creality, Voron and, in the site’s words, hundreds of other printers. Printer makers can apply to have official profiles delivered as over-the-air updates.
  • Runs on: Windows 10 or later (x64 and Arm64), macOS 10.15 or later (one universal download) and Linux (AppImage and Flatpak), according to its download page and releases.
  • Watch out for: the download page labels the nightly builds unstable, so stay on the stable release unless you want to test. The Bambu network plug-in is optional and built on Bambu Lab’s non-free libraries. The README warns that look-alike sites exist and names www.orcaslicer.com as the only official website.

Bambu Studio open source Bambu Lab

Bambu Studio is Bambu Lab’s slicer. Its website calls it open-source, feature-rich slicing software, and the GitHub project describes it as software for Bambu Lab and other 3D printers.

  • Licence and lineage: AGPL-3.0. It is based on PrusaSlicer, which in turn comes from Slic3r.
  • What it highlights: a project-based workflow with 3MF and multi-plate support, high-speed printing settings, multi-colour printing with filaments automatically mapped to AMS slots, remote control and monitoring, STEP file support and 3D text.
  • Printers: built mainly for Bambu Lab printers. The project also bundles profiles for other makers (Creality, Prusa, Voron and Qidi among them) and has a feature for creating a custom printer or nozzle.
  • Runs on: Windows 10 (64-bit) or later and macOS 10.15 or later; Linux through AppImage files on GitHub (Ubuntu 22.04 and 24.04) or Flathub.
  • Watch out for: the Bambu network plug-in is optional and based on non-free libraries; without it you can still start prints from an SD card. The pages I read do not say whether an account is required. Bambu’s page offers a stable download and a beta; choose deliberately.

PrusaSlicer open source Prusa Research

PrusaSlicer is developed by Prusa Research and was originally based on Slic3r. Prusa’s page calls it free and open source, with no account required, working offline, and funded by the company’s hardware and filament sales.

  • Licence: AGPL-3.0. It slices for filament (FFF) and for mSLA resin printers.
  • What it highlights: organic tree supports, multi-material colour painting with MMU3 and multi-extruder support, a cut tool that can add alignment pins, Simple, Advanced and Expert modes, a built-in Printables.com browser, a command-line interface, and sending to Prusa Connect, OctoPrint and Klipper.
  • Printers: Prusa’s page advertises more than 200 tested profiles for Prusa printers and filaments. Profiles for third-party vendors (Prusa’s help centre names Lulzbot and Creality as examples) are switched on in the Configuration Wizard.
  • Runs on: Windows 10 or later (64-bit), macOS (one build for Intel and Apple Silicon) and Linux through Flathub.
  • Watch out for: when checked, the stable line was 2.9 and a 3.0 line was in public alpha, which Prusa says it does not recommend for production. Prusa’s help centre already labels 2.9 as legacy beside 3.0, so check which version is current when you download.

Cura open source UltiMaker

Cura is UltiMaker’s slicer. UltiMaker describes it as free and open-source software with a slicing engine and more than 400 customisable settings.

  • Licence: the Cura application is LGPL-3.0. The slicing engine, CuraEngine, is a separate project under AGPL-3.0.
  • What it highlights: a custom mode with 400+ settings, “intent” profiles for particular applications, recommended profiles, the UltiMaker Marketplace for material profiles and plug-ins, and STEP and IGES file support.
  • Printers: UltiMaker’s page stresses its own printers, while its support article says Cura also works with many other brands: choose the “Non UltiMaker printer” option, and add a custom printer if your model is not listed. Manufacturers can contribute printer definitions through GitHub.
  • Runs on: Windows (installer and an enterprise MSI), macOS (Intel and Apple Silicon) and Linux (AppImage).
  • Watch out for: the pages I read do not say whether Cura needs an account. UltiMaker printers connected through Digital Factory do use one.

SuperSlicer open source PrusaSlicer fork

SuperSlicer, previously called Slic3r++, is a fork of PrusaSlicer maintained by one developer, supermerill. Its wiki says it has nothing to do with Prusa Research. It has no separate website: the GitHub project and its wiki are the official sources.

  • Licence: AGPL-3.0.
  • What it highlights: generated calibration tests and built-in calibration prints, top-surface quality settings, better thin walls, options to change hole dimensions, a reworked brim (inside, outside only, “ears”, per object), more seam options, and the PrusaSlicer features it is built on.
  • Printers: any modern printer on the RepRap toolchain, such as Marlin or Klipper machines, using PrusaSlicer-style vendor presets. The README also covers mSLA resin printers.
  • Runs on: prebuilt Windows, Linux and macOS 64-bit releases. The README says the Linux and macOS builds are only compiled, not tested by the author.
  • Watch out for: the release situation is unusual. When checked, the release GitHub marks as latest dated from July 2024, while all newer builds, through the end of 2025, were marked pre-release; the main branch had been quiet since November 2025 though other branches were active in autumn 2026. The README does not say which build to use, and one 2.7 release note says the Intel macOS build was broken at that point. Read the releases page before you choose.

Creality Print open source Creality

Creality Print is Creality’s official slicer for FDM printers. Its README says it was forked from Orca Slicer and also incorporates features from SuperSlicer.

  • Licence: AGPL-3.0.
  • What it highlights: the README lists automatic calibrations, a sandwich (inner-outer-inner) wall mode, polyhole conversion, Klipper support and more granular controls. The 7.3.0 release notes (September 2026) headline full-colour and multi-colour printing, purge-waste reduction, adaptive TPMS infill, ZAA anti-aliasing, multi-nozzle printing on the K3 and AI-assisted features.
  • Printers: you pick your printer model or models at first run. The bundled Creality profile file covers dozens of Creality models, and the project folder holds profiles from other makers, but the pages I read do not say that other brands are supported.
  • Imports: STL, OBJ and STEP models and 3MF projects.
  • Runs on: Windows 10 or 11 (64-bit) and macOS, with Linux AppImage and Flatpak files on GitHub. Creality’s download page shows a Linux tab and also a line saying only Windows and Mac are supported, and its own pages disagree on the oldest macOS version.
  • Watch out for: the README is out of date (it is titled for version 6.0), so use the release notes. The software has a Creality Cloud login; I found no page that says whether it is optional.

ElegooSlicer open source ELEGOO

ElegooSlicer is described by its README as an open-source slicer compatible with most FDM printers. The README and ELEGOO’s user agreement both say it is based on Orca Slicer.

  • Licence: AGPL-3.0, and ELEGOO’s user agreement says its software is provided on a free-of-charge basis, while reserving the right to adjust its licensing model.
  • What it highlights: the README lists no features, so this comes from the release notes: a multi-build-plate option, account login and Nexprint integration, support for the Centauri Carbon 2 and for CANVAS, automatic discovery of newer printers, and merged updates from Orca Slicer 2.3.1.
  • Printers: the bundled Elegoo profiles include the Centauri and Centauri Carbon, the Neptune 3 and 4 series, Neptune X and the OrangeStorm Giga; the project also holds profiles from many other makers.
  • Runs on: Windows and macOS (Intel and Apple Silicon) on ELEGOO’s download page. GitHub also has a Linux AppImage, which an earlier release note describes as early-stage support.
  • Watch out for: the GitHub project moved to a new owner name, so older links redirect. The pages I read do not list the model file types it imports or say whether an account is required.

QIDI Studio open source QIDI

QIDI Studio is the slicer QIDI Technology developed for its own printers. QIDI’s pages say it is based on Bambu Studio; the README also thanks PrusaSlicer and Orca Slicer. The download page is titled as a free slicer.

  • Licence: AGPL-3.0.
  • What it highlights: the README lists a fast and stable slicer, compatibility with QIDI’s high-speed printers and filaments (plus some general filaments), connecting to a printer directly by IP address, and remote connection over the internet. Model tools and calibration functions are listed too.
  • Printers: QIDI printers only, as far as the pages say. The bundled profiles cover the Q, X-3, X-4 and X-5 series; QIDI’s website lists older printers under other slicers.
  • Imports: 3MF, STL, STEP, AMF and OBJ models.
  • Runs on: Windows 10 or later (64-bit), macOS 10.15 or later and Linux through AppImage files on GitHub.
  • Watch out for: the wiki says you can log in to a QIDI account to sync devices; it does not say login is compulsory. QIDI’s own wiki states the Linux minimum with a typo, so check the release notes.

Snapmaker Orca open source Snapmaker

Snapmaker Orca is an open-source slicer for FDM printers based on Orca Slicer, tuned by Snapmaker for its printers; GitHub marks it as a fork of Orca Slicer. Snapmaker’s page presents it as free and open source.

  • Licence: AGPL-3.0.
  • What it highlights: multi-colour and multi-material printing, pre-tuned filament profiles, remote control and monitoring over the internet or your network, and Full Spectrum colour mixing for the Snapmaker U1, announced from version 2.3.3.
  • Printers: Snapmaker’s page says it is currently optimised for the U1, with direct connection for the Artisan, 2.0 and J1 promised for later updates, and adds that it also supports many third-party printers.
  • Imports: 3MF, STL, STEP, AMF and OBJ models.
  • Runs on: Windows 10 or later and macOS 12 or later; Snapmaker’s wiki says to download Linux versions from GitHub, where there is an AppImage and Flatpak files.
  • Watch out for: Snapmaker publishes alpha and beta builds frequently, so the newest release on GitHub may be a test version. The U1 setup guide has a sign-in step and says you need to bind the printer to control it remotely; the pages I read do not say whether you need an account just to slice.

Anycubic Slicer Next free Anycubic

Anycubic Slicer Next is Anycubic’s slicer for its filament printers. Anycubic’s update log describes its first release as Orca-based, and its wiki calls the program open source. Anycubic’s download page offers it without a price.

  • Licence: I did not find a licence file or a public source repository, so no licence is named here.
  • What it highlights: Anycubic’s update log and guides describe printer profiles for the Kobra line, LAN printing by IP address, preset syncing and a Farm Mode for managing several printers.
  • Printers: Anycubic Kobra printers; the update log names the Kobra 2 series, Kobra 3, Kobra S1 and Kobra X among others.
  • Runs on: Windows 10, macOS 11.3 or later and Linux on Ubuntu 24.04 only. Anycubic’s pages disagree about the oldest Windows and macOS versions.
  • Watch out for: no checksums are published on the pages I read, and Anycubic offers no feed that shows the newest version, so read its update log. Download it only from Anycubic’s own pages.

How to Choose

  1. Start with your printer. The most important question is whether the slicer has a good profile for your exact model. Bambu Lab, Prusa and UltiMaker printers have first-party slicers (Bambu Studio, PrusaSlicer, Cura), and Creality, ELEGOO, QIDI, Snapmaker and Anycubic each publish their own.
  2. Decide how much control you want. PrusaSlicer’s Simple, Advanced and Expert modes and Cura’s recommended and custom modes both let you start with few settings and open up more later. Orca Slicer and SuperSlicer lean towards calibration and fine control.
  3. Think about printer features. Colour mixing, multi-colour systems and remote monitoring are often best supported in the slicer made by the printer’s maker (for example AMS colour mapping in Bambu Studio and Full Spectrum on the Snapmaker U1).
  4. Check the licence and the account. Nine of the ten are AGPL-3.0 or LGPL-3.0 open source. Some have optional cloud or account features; where the pages did not say, the cards above say so.
  5. Try two if you are unsure. Slice the same model in your maker’s slicer and in Orca Slicer or PrusaSlicer, compare the preview and the estimated time, then keep the one you like.

Before You Download

  • Use the official source. Look-alike download sites exist; Orca Slicer’s own README warns about them. Get each slicer from its maker’s page or its official GitHub releases, which each of our guides links to.
  • Prefer the stable release. Several projects also publish alpha, beta or nightly builds (Orca Slicer, Bambu Studio, PrusaSlicer 3.0, Cura, Snapmaker Orca, SuperSlicer). They are for testing, and the projects themselves warn against using some of them for real work.
  • Read the licence note on plug-ins. Bambu Studio and Orca Slicer both have an optional Bambu network plug-in that relies on non-free libraries; the slicers themselves are open source.
  • Make a model first. The slicer needs a clean STL or 3MF file. See our guide to free CAD software for 3D printing, and repair a faulty mesh with MeshLab or Blender.
  • Check the strength of a load-bearing part with the beam deflection calculator or the factor of safety calculator before you print it.

Frequently Asked Questions

What is the best slicer for 3D printing?

There is no single best one. The best slicer is the one with a good profile for your printer and settings you are comfortable with. Bambu Studio is made for Bambu Lab printers, PrusaSlicer for Prusa printers, Cura for UltiMaker printers and many other brands, and Orca Slicer for printers from several brands. If you own a Creality, ELEGOO, QIDI, Snapmaker or Anycubic printer, that maker publishes its own slicer. Try your printer maker’s slicer first and compare it with one more if you are unsure.

Are 3D printer slicers free?

Yes. All ten slicers in this guide are free to download, and none of the pages I read shows a price for the slicer itself. Eight are open source under the AGPL-3.0 licence and Cura’s application is under the LGPL-3.0; for Anycubic Slicer Next I did not find a licence. Cura also has a separate Cura Enterprise edition for organisations, whose price I did not find.

What is the difference between Orca Slicer, Bambu Studio and PrusaSlicer?

They are related. PrusaSlicer comes from Slic3r and is developed by Prusa Research. Bambu Studio, made by Bambu Lab, is based on PrusaSlicer. Orca Slicer, a community project, says it draws on Bambu Studio and PrusaSlicer. In use, PrusaSlicer is the choice for Prusa printers (it also supports mSLA resin printers), Bambu Studio is built around Bambu Lab printers and their AMS colour system, and Orca Slicer supports printers from many brands and puts calibration tools in the program. Choose by printer first.

Is Orca Slicer a fork of Bambu Studio?

It started that way and its description has changed. An older README (version 2.2.0) says Orca Slicer was originally forked from Bambu Studio. The current README says it draws on Bambu Studio and PrusaSlicer, with ideas inspired by Cura and SuperSlicer, and that Bambu Studio was itself forked from PrusaSlicer. Creality Print, ElegooSlicer and Snapmaker Orca say they are based on or forked from Orca Slicer, and Anycubic’s update log calls Anycubic Slicer Next Orca-based.

Which slicer should I use for a Creality, ELEGOO, QIDI, Snapmaker or Anycubic printer?

Start with the maker’s own slicer, because its profiles come from the maker: Creality Print, ElegooSlicer, QIDI Studio, Snapmaker Orca or Anycubic Slicer Next. Creality Print, ElegooSlicer, Snapmaker Orca and Anycubic Slicer Next are Orca-based; QIDI Studio is based on Bambu Studio. Orca Slicer’s own pages list Creality among the brands it has presets for, so it is a fair second option for a Creality printer; for the others, look in Orca Slicer for a profile of your exact model before you rely on it. QIDI’s pages describe QIDI Studio as being for QIDI printers.

Do I need an account to use a slicer?

Not for slicing, as far as the pages I read show, but the answer differs by program. Orca Slicer’s site says no account is needed, and Prusa’s page says PrusaSlicer needs no account. For the other eight, the pages I read do not say that an account is required to slice. Several have optional or printer-linked sign-in features, such as the Creality Cloud login, ELEGOO’s account and Nexprint, a QIDI account for syncing devices, Snapmaker’s sign-in for binding a printer, and the optional Bambu network plug-in. Each of our guides says which applies.

Which 3D printer slicers are open source?

Nine of the ten: Orca Slicer, Bambu Studio, PrusaSlicer, SuperSlicer, Creality Print, ElegooSlicer, QIDI Studio and Snapmaker Orca are AGPL-3.0, and the Cura application is LGPL-3.0 (its slicing engine, CuraEngine, is a separate AGPL-3.0 project). Anycubic’s wiki calls Anycubic Slicer Next open source, but I found no licence file or public source repository, so this guide does not name a licence for it.

Which file types can these slicers open?

STL is the safest choice, and 3MF can carry more than STL in one file. The pages I read also name other formats: Creality Print lists STL, OBJ and STEP models and 3MF projects; QIDI Studio lists 3MF, STL, STEP, AMF and OBJ; Snapmaker Orca lists the same set; Bambu Studio highlights STEP support; and Cura’s page lists STEP and IGES. For which CAD program exports which format, see our guide to free CAD software for 3D printing.

Can these slicers be used for resin printers?

Mostly no. PrusaSlicer and SuperSlicer say they also support mSLA resin printers. Orca Slicer, Creality Print, ElegooSlicer, Snapmaker Orca and Anycubic Slicer Next describe themselves as slicers for FDM (filament) printers. Resin printers usually have their own slicers, and our UVtools guide covers a free tool for checking and repairing sliced resin files.

Is it safe to download a slicer from any website?

No. Look-alike download sites exist, and Orca Slicer’s README warns about them and names www.orcaslicer.com as its only official site. Download each slicer from its maker’s page or from the project’s official GitHub releases, which each of our guides links to. GitHub shows a SHA-256 digest beside release files, so you can check a download against it. Anycubic does not publish checksums on the pages I read.

Leave a Reply

Your email address will not be published. Required fields are marked *